What Are EMESRT’s Nine Layers of Vehicle Interaction Control?
EMESRT’s vehicle interaction model describes nine layers of defence against collisions between vehicles, equipment and people in mining. Layers 1 and 2 are design controls, layers 3 to 7 are operating controls, and layers 8 and 9 are reactive technology controls that advise or intervene. Collision avoidance technology works best when the layers before it are already in place.
Many mines start their vehicle interaction programme by choosing a collision avoidance system.
The leading sites start by asking what has to be in place first.
That was the central message of the ICMM and EMESRT ICSV Vehicle Interaction Leading Sites Forum, held in Santiago, Chile, in September 2026 with 43 delegates from 17 mining companies. Delegates called for “foundations before technology”: site requirements, vehicle separation, operating procedures, governance and workforce readiness before collision avoidance systems are adopted.
Technology is the last line of defence, not the first.
The Nine Layers at a Glance
The table below follows EMESRT’s grouping of the layers by when each control acts: at the design stage, during operation, or in the seconds and milliseconds before an incident.
| Layer | Control | Group | Typical examples |
|---|---|---|---|
| 1 | Site Requirements | Design | Equipment specifications, standards, mine design and plans |
| 2 | Segregation Controls | Design | Berms, access controls, separate traffic routes |
| 3 | Operating Procedures | Operate | Traffic rules, right of way, communication protocols |
| 4 | Authority to Operate | Operate | Training, licences and competency authorisation |
| 5 | Fitness to Operate | Operate | Fatigue management and fitness-for-duty checks |
| 6 | Operating Compliance | Operate | Pre-start checks, supervision and compliance monitoring |
| 7 | Operator Awareness | Operate | Visual cues, proximity alerts and awareness technology |
| 8 | Advisory Controls | React | Alerts that prompt corrective action, vehicle de-rating |
| 9 | Intervention Controls | React | Automatic slowing, stopping or inhibiting machine movement |
Layer names and grouping are based on EMESRT’s vehicle interaction nine-layer model, as presented in the ICMM ICSV Vehicle Interaction Leading Sites programme background. For a summary of how Mine Safe Global’s systems align with the model, see our EMESRT compliance page.
Layers 1 to 6: The Foundations
The first six layers do not depend on collision avoidance technology. They reduce how often vehicles and people come into conflict in the first place, and they set the conditions in which technology can work properly.
1. Site Requirements
Define what equipment, standards and mine design the operation requires, including the vehicle interaction performance expected from new and existing machines.
2. Segregation Controls
Separate light vehicles, heavy equipment and pedestrians wherever possible, using road design, berms, barriers and access control.
3. Operating Procedures
Set clear traffic rules, right-of-way rules, communication protocols and procedures for high-risk areas such as intersections and loading zones.
4. Authority to Operate
Make sure only trained, licensed and authorised people operate each type of equipment.
5. Fitness to Operate
Manage fatigue and fitness for duty so operators are able to respond to hazards and warnings.
6. Operating Compliance
Check that procedures are actually followed, through pre-start checks, supervision and monitoring.
Layers 7 to 9: Where Technology Takes Over
Layers 7 to 9 are where collision avoidance technology adds protection on board the machine:
- Layer 7, Operator Awareness: the system detects nearby vehicles, equipment or people and alerts the operator.
- Layer 8, Advisory Controls: the system prompts corrective action or, in appropriate configurations, de-rates the vehicle.
- Layer 9, Intervention Controls: the system can slow, stop or inhibit machine movement when a hazardous interaction requires action.
For a detailed comparison, read Level 7 vs Level 8 vs Level 9 Mining Collision Avoidance and EMESRT Level 9 Explained.
Why Skipping the Foundations Undermines Technology
When collision avoidance technology is installed on a site with weak foundations, it is asked to compensate for problems it was never designed to solve.
- Poor segregation means vehicles and people interact constantly, which can lead to frequent alarms and nuisance alerts.
- Unclear procedures mean operators do not know what response an alert expects.
- Frequent nuisance alarms erode operator trust, and alerts start to be ignored.
- Fatigue and fitness gaps slow the operator’s reaction to Level 7 and Level 8 warnings.
- Weak compliance checks allow systems to be bypassed, damaged or left unavailable.
The ICSV Leading Sites programme puts it simply: “There are no silver bullets.” Its principles also call for understanding exactly which use cases the technology will and will not solve, and for considering the impact of technology on human behaviour.
How to Find the Control Gaps on Your Site
A practical gap assessment works through each layer and asks three questions:
Is the Control in Place?
Does the site have a documented requirement, design feature, procedure or system for this layer?
Does It Work in Practice?
Is the control actually followed, maintained and effective in daily operations, across every shift?
How Do You Know?
What evidence shows it works: inspections, audits, near-miss data, alarm data or system availability records?
Where Are the Highest Risks?
Focus first on the interactions with the most severe potential outcomes, such as heavy equipment and light vehicles or pedestrians.
A Phased Roadmap from Foundations to Level 9
| Phase | Focus | Outcome |
|---|---|---|
| Phase A: Baseline | Map vehicle interactions and assess layers 1 to 9 | A clear picture of current controls and their effectiveness |
| Phase B: Foundations | Close gaps in site requirements, segregation, procedures, authority, fitness and compliance | Fewer interactions, clear rules and a workforce ready for technology |
| Phase C: Awareness and advice | Implement or improve Level 7 and Level 8 technology | Operators alerted and guided before interactions become hazardous |
| Phase D: Intervention | Integrate Level 9 intervention with machine controls | Machines able to slow or stop automatically when a warning is missed |
| Ongoing | Validate performance and review controls | Controls that stay effective as the fleet and site change |
Level 9 intervention relies on integration with machine controls. Mine Safe Global’s MI Machine Controller Interface (MCI) is designed to support that integration across mixed OEM fleets and older equipment, subject to technical assessment and validation. ISO 21815 provides the international reference for the interface between collision avoidance systems and machines.
Validating That Your Controls Work
The ICSV forum discussions moved beyond technology integration towards control gap identification and performance validation. In practice, that means reviewing evidence on a regular cycle:
- Near-miss and incident trends by interaction type and location.
- Alarm data, including nuisance alarms and operator responses.
- Collision avoidance system availability and fault records.
- Compliance with procedures, segregation rules and pre-start checks.
- Feedback from operators, supervisors and maintenance teams.
No layer works in isolation. A vehicle interaction programme is only as strong as the weakest layer that a real incident has to pass through.
Frequently Asked Questions
What are the nine layers of EMESRT vehicle interaction control?
The nine layers are Site Requirements, Segregation Controls, Operating Procedures, Authority to Operate, Fitness to Operate, Operating Compliance, Operator Awareness, Advisory Controls and Intervention Controls.
How are the nine layers grouped?
EMESRT groups the layers by when they act. Layers 1 and 2 are design controls, layers 3 to 7 are operating controls, and layers 8 and 9 are reactive controls that advise or intervene in the seconds and milliseconds before an incident.
What does “foundations before technology” mean?
It means putting site requirements, vehicle separation, operating procedures, governance and workforce readiness in place before relying on collision avoidance technology. This was a central message of the 2026 ICSV Vehicle Interaction Leading Sites Forum in Santiago, Chile.
Can Level 9 collision prevention replace layers 1 to 6?
No. Level 9 intervention is the last line of defence. It works best when design and operating controls have already reduced the number and severity of interactions.
Why do collision avoidance systems create nuisance alarms?
Nuisance alarms often increase when vehicles and people interact constantly because segregation, procedures or site design are weak. Strengthening the foundation layers and configuring the system for the operating environment both help reduce them.
Where should a mine start its vehicle interaction roadmap?
Start with a baseline: map where vehicles and people interact, then assess each of the nine layers to find control gaps. Close the foundation gaps first, then add or upgrade Level 7, 8 and 9 technology.
Start Your Vehicle Interaction Roadmap with Mine Safe Global
Not sure where your site stands across the nine layers?
Planning a move from operator alerts to Level 9 intervention?
Mine Safe Global can help you identify control gaps and plan a practical path from foundations to collision prevention.
Request a vehicle interaction gap assessment.
One Fleet. One Safety Standard. Mine Safe Global.
Last updated by Mine Safe Global